Category:File system

From Texas Instruments Embedded Processors Wiki

Jump to: navigation, search

Translate this page to de - Deutsch es - Español fi - Suomi fr - Français ja - 日本語 sv - Svenska zh - 中文 Translate Show original

Category:File system

This category lists articles about creating and using various file systems on DaVinci products,

	Links
	ARM Microcontroller MCU ARM Processor Digital Media Processor Digital Signal Processing Microcontroller MCU Multi Core Processor Ultra Low Power DSP 8 bit Microcontroller MCU 16 bit Microcontroller MCU 32 bit Microcontroller MCU

Pages in category "File system"

The following 20 pages are in this category, out of 20 total.

C CRAMFS Utilities CRAMFS kernel configuration Create a CRAMFS Target Image Create a JFFS2 Target Image Create a YAFFS Target Image Creating a Root File System for Linux on OMAP35x D Disabling NAND HW ECC support

F Filesystem Optimization Filesystem in NOR or NAND Flash configuration in the Kernel G Get FFS partition configuration Get the Flash Erase Block Size H HOWTO Create Filesystems on DaVinci J JFFS2 kernel configuration

K Kernel Command Line Partition configuration M MTD Utilities P Put CRAMFS Image to Flash Put JFFS2 Image to Flash Put YAFFS Image to Flash Y YAFFS2 kernel configuration

Media in category "File system"

The following 5 files are in this category, out of 5 total.

Cramfs config.jpg 135,295 bytes	Disable hw ecc for y... 362 bytes	HW ECC disable.jpg 116,245 bytes	JFFS2 enabled.jpg 146,284 bytes
YAFFS2 enabled.jpg 152,404 bytes

Retrieved from "http://processors.wiki.ti.com/index.php/Category:File_system"

Category: Linux

Leave a Comment

• This page was last modified on 30 September 2008, at 18:25.
• This page has been accessed 16,775 times.
• Content is available under Creative Commons Attribution-Share Alike 3.0 license.

• Privacy policy
• About Texas Instruments Embedded Processors Wiki
• Disclaimers