System Reset (Emulation)

From Texas Instruments Embedded Processors Wiki

Jump to: navigation, search

Translate this page to

Some JTAG Connectors and emulators (such as the XDS560 revision D) support System Reset. When connected properly to a JTAG connector which supports it, the user can reset the target card from the debugger.
When used with an XDS560 revision D cable pod, Code Composer Studio v4 can toggle the system reset pin on a suitable JTAG header such as the 20 pin Compact TI or 20 pin ARM connector.

Note, as of CCSv4, Target-->Reset-->System Reset generates the system reset via ICEpick

For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article System Reset (Emulation) here.