Please note as of Wednesday, August 15th, 2018 this wiki has been set to read only. If you are a TI Employee and require Edit ability please contact x0211426 from the company directory.


From Texas Instruments Wiki
Jump to: navigation, search
For technical support please post your questions at Please post only comments about the article SafeBABI here.

Comments on SafeBABI

Sherman said ...

Please feel free to leave your comments or questions and we will get back to you in a timely manner.

--Sherman 16:10, 2 August 2010 (CDT)

Kiz said ...

What changes are needed to make this operate on the ISM band for someone like me with the 868-915 Chronos.

--Kiz 12:38, 17 August 2010 (CDT)

Kiz said ...

disregard the last comment, not sure how I missed the ISM builds.

--Kiz 12:49, 17 August 2010 (CDT)

Sherman said ...

We now have an email address if you have any questions that aren't addressed on this website.

--Sherman 23:13, 26 September 2010 (CDT)

Rkaplan27 said ...

The CC1110 code posted is missing all of the .c files, and so the source is incomplete. Could you please provide them?

--Rkaplan27 19:12, 1 November 2010 (CDT)

Rkaplan27 said ...

I thought I'd mention to all who read this that I never received a response regarding the lack of source code in the CC1110 "Source code section". Furthermore, I investigated the CC430 Watch Code out of curiosity, and that did contain source code, but without modifications it could not be compiled. If your looking for code that shows how to add a menu into the watch, this code may be of use to you for referencing. Personally, I was expecting a direct p2p example from this as a reference point for a project, but the project instead uses an AP to ED network. I don't personally require assistance anymore, for I managed to link a CC1110 Mini DK to my watch using a p2p link by referencing TI's documentation. I hope the SafeBabi team doesn't take these comments the wrong way, because this is a great project, and it seems like the team got things working and did a good job, but from an educational standpoint, the project is not very helpful. More specifically, consider one of the goals for the Co-Op Design challenge 2010: "Best of all, more source code is created and released for the use and benefit of all." This was unfortunately not the case with this project, but I hope my comments are helpful in saving others the time of thinking this project can be a reference for a similar wireless application's design. And if this comment is removed, my TI rep will be contacted.

--Rkaplan27 01:25, 30 November 2010 (CST)

Msherman said ...

I have retested the source code that I posted on the site and am encountering the same issue. Unfortunetly my copy of the code is on a laptop in Houston. If you can send an email to, I will send you the updated code as soon as I get home for winter break. At the same time, I will be posting the code on sourceforge with an updated link. I am sorry for the issues, and like I said please drop me an email at so that I may get you that code ASAP.

-Michael Sherman

--Msherman 23:15, 6 December 2010 (CST)

Zurano said ...

Anybody have the complete source code of this project?

--Zurano 06:44, 23 February 2011 (CST)

Aqha 123 said ...

if anyone can help me load the cc1110 code, please contact me at i have the watch code loaded, but i can't load to the cc1110 THANKS!!!

--Aqha 123 06:29, 8 March 2011 (CST)

Sudarshann said ...

Source code for CC1110 does not open. i tried with serveral versions of IAR but still no luck. can you provide me you the working source code for cc1110

Thank you very much

--Sudarshann 09:11, 29 October 2012 (CDT)

There are no threads on this page yet.