NOTICE: The Processors Wiki will End-of-Life in December of 2020. It is recommended to download any files or other content you may need that are hosted on processors.wiki.ti.com. The site is now set to read only.

Talk:JTAG Scan Chain Length

From Texas Instruments Wiki
Jump to: navigation, search
For technical support please post your questions at http://e2e.ti.com. Please post only comments about the article JTAG Scan Chain Length here.

Comments on JTAG Scan Chain Length


Koller said ...

We are testing a DSP board with 4 TMS320C6455 1GHz DSPs. The four DSPs are connected to JTAG chain. We have Spectrum Digital XDS510SUSB emulator cable. The SDConfig program reports no fault, but the JTAG chain length is reported 24 four devices. The 24 probably a wrong number, because one DSP IR Length is 38 bit.

The Code Composer Studio cannot connect to the DSPs.

The TCK signal has been check by scope, seems to be all right.

The board was designed according to the current chip errata.

What could be the problem?


--Koller 12:42, 9 February 2010 (CST)