Please note as of Wednesday, August 15th, 2018 this wiki has been set to read only. If you are a TI Employee and require Edit ability please contact x0211426 from the company directory.
OMAP35xx DVSDK WinCE 100 Getting Started Guide
This Getting Started Guide (GSG) walks you through the steps of setting up the OMAP35x EVM and installing the OMAP35xx WinCE DVSDK software. You should proceed through this guide in the order listed on this page for best results. By the end of this Getting Started Guide you will have the OMAP35x EVM booting to WinCE 6.0 R2 and the WinCE host development environment configured. You should also bookmark the WinCE category since new articles will continue to appear in that list.
If you are reading this GSG as a file please check http://wiki.davincidsp.com/index.php/OMAP35xx_DVSDK_WinCE_100_Getting_Started_Guide for the latest updates.
GSG: OMAP35xx WinCE DVSDK Overview provides an overview of the OMAP35xx WinCE DVSDK.
GSG: OMAP35xx WinCE DVSDK Hardware Setup provides information on setting up the OMAP35xx WinCE DVEVM hardware.
GSG: OMAP35xx WinCE DVSDK Software Setup (new) covers how to install the software required to use the OMAP35xx WinCE DVSDK (for DVSDK 1.00.00.05 and later). If you are using DVSDK 1.00.00.04, see the old software setup page instead.
GSG: OMAP35xx WinCE DVSDK Running the Demos describes how to set up, execute, and shut down the demos.